Cisco

Cisco 1-Port Fast Ethernet Network Module

Cisco 1-Port Fast Ethernet Network Module

Ideal for a wide range of LAN applications, the Fast Ethernet network modules support many internetworking features and standards. This single port network module offers 100BaseFX Ethernet.

 

Read More
Cisco 48-port Fast Ethernet Switching Module

Cisco 48-port Fast Ethernet Switching Module

The 48-Port 10/100-Mbps Fast Ethernet switching module, provides 48 switched, 10/100-Mbps full- or half-duplex Fast Ethernet ports using RJ-45 connectors. This linecard can be mixed and matched to suit a wide range of wiring closet, branch office, data center and metro Ethernet deployments.

 

Read More
Cisco Catalyst 6500 16-port GBIC Switching Module

Cisco Catalyst 6500 16-port GBIC Switching Module

The new enhanced Catalyst 6500 16-port GBIC-based Gigabit Ethernet Module provides a cost-effective and flexible approach to deploying gigabit Ethernet in the backbone of the network as well as server-farms. Supporting the GBIC form factor that can be used with Fiber or Copper installations, this module also offers higher density coarse wave division multiplexing (CWDM) and ZX-based GBIC deployments when used in the Catalyst 6500 multilayer switch series or Cisco 7600 Internet Router Series.

 

Read More
Cisco Voice/Fax Network Module

Cisco Voice/Fax Network Module

The Cisco IP Communications voice/fax network modules provide enterprises, managed service providers, and service providers the ability to directly connect the public switched telephone network (PSTN) and traditional telephony equipment (private branch exchange [PBX], key system, analog telephones, fax machines, etc.) to existing Cisco 2600XM Series, Cisco 2691, 3640, and 3660, and Cisco 3700 Series voice gateway routers. This set of Cisco IP Communications voice/fax network modules delivers the most versatile combination of analog and digital voice and data capabilities in a single network module

 

Read More
Cisco 36-Port 10/100 EtherSwitch High Density Service Module

Cisco 36-Port 10/100 EtherSwitch High Density Service Module

The Cisco 36-port 10/100 EtherSwitch modules for Cisco 2800, 3600, 3700, 3800 series routers offer branch office customers the option to integrate switching and routing in one platform. Combining robust Layer 3 flexible WAN routing with low-density line-rate Layer 2 switching, the EtherSwitch modules provide straightforward configuration, easy deployment and integrated management in a single platform.

 

Read More
Cisco 1000Base-SX GBIC

Cisco 1000Base-SX GBIC

The industry-standard Cisco Gigabit Interface Converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. Cisco GBICs can be interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, or 1000BASE-CWDM interfaces on a port-by-port basis.

 

Read More
Cisco 4-Port FXS or DID VIC Voice Interface Card (VIC)

Cisco 4-Port FXS or DID VIC Voice Interface Card (VIC)

The 4-port high-density FXS/DID VIC can support up to 4 foreign-exchange-station (FXS) ports for directly connecting phones or fax machines, or it can be used to connect up to four direct-inward-dial (DID) analog trunks, providing customers the flexibility they need for their unique business environment.

Each port on the 4-Port FXS/DID VIC is selectable for use in either FXS or DID mode. The 4-Port FXS/DID VIC is the same size as the existing two-port voice interface cards (VICs), allowing it to slide into either WIC/VIC slot or VIC slot in Cisco 1751 and 1760. The VIC-4FXS/DID in the Cisco 1700 is used to connect analog phones or fax machines. The long-distance calls between small enterprise branch offices and headquarters are carried by IP network, while the local calls are carried by PSTN, which also provide backup to the IP network.

 

Read More
Cisco Catalyst 4000 Series Switching Module

Cisco Catalyst 4000 Series Switching Module

48-port 10/100/1000-Mbps Gigabit Ethernet (RJ-45) WS-X4548-GB-RJ45 (power-efficient). This module, with multispeed autosensing, autonegotiating technology, provides wiring-closet investment protection by allowing Fast Ethernet desktops to migrate to Gigabit Ethernet in the future, without replacing the switch line cards

 

Read More
Cisco Catalyst Switching Module

Cisco Catalyst Switching Module

The 48-port 10/100/1000BASE-T switching module (WS-X6748-GE-TX) provides 48 switched, 10/100/1000-Mbps, full- or half-duplex ports.

 

Read More
Cisco WAN Interface Card (WIC)

Cisco WAN Interface Card (WIC)

The Cisco 4-port 10/100BASE-T Fast Ethernet Switch WAN Interface Card (WIC-4ESW) for Cisco 1700 Series modular access routers is an intelligent managed switch, offering small businesses and enterprise small branch office customers the option to integrate LAN switching and routing into one platform. The advanced capabilities of the WAN interface card (WIC), including VLAN support, Spanning Tree Protocol, and traffic prioritization, provide the flexibility for customers to deploy different network configurations.

 

Read More
Cisco Service Adapter VPN Acceleration Module

Cisco Service Adapter VPN Acceleration Module

The Service Adapter VPN Acceleration Module 2 (SA-VAM2) is a single-width port adapter supported on the Cisco 7301 router and the Cisco 7200 series routers with the network processing engine 225 (NPE-225), 400 (NPE-400), G1 (NPE-G1), and the Network Services Engine (NSE-1) services accelerator.

An SA-VAM2 provides hardware-assisted tunneling and encryption/compression services for Virtual Private Network (VPN) remote access, site-to-site intranets, and extranet applications, including security, quality of service (QoS), firewall and intrusion detection, and service-level validation and management. The SA-VAM2 offloads IPSec processing from the main processor to permit resources on the processor engines for other tasks.

 

Read More
Cisco GLC-SX-MM 1000Base-SX SFP (mini-GBIC)

Cisco GLC-SX-MM 1000Base-SX SFP (mini-GBIC)

The Cisco industry-standard Small Form-factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-SX, 1000BASE-LX/LH, or 1000BASE-ZX on a port-by-port basis.

 

Read More
Cisco Supervisor Engine 720

Cisco Supervisor Engine 720

The Cisco Catalyst 6500/Cisco 7600 Series Supervisor Engine 720 is a family of Supervisor Engine(s) designed to deliver scalable performance and rich set of IP features in hardware. Its hardware-based feature set enables applications such as traditional IP forwarding, Layer 2 and Layer 3 Multiprotocol Label Switching (MPLS) VPNs, Ethernet over MPLS (EoMPLS) with quality of service (QoS) and security features.

 

Read More
Cisco 48-port IEEE 802.3af-compliant PoE Switching Module

Cisco 48-port IEEE 802.3af-compliant PoE Switching Module

The Cisco Catalyst 4500 Series Switch expands Power-over-Ethernet (PoE) support. PoE, offers greater flexibility and mobility to users by delivering standards-based integrated power to increase network flexibility and usefulness with the support of new devices, services, and applications. IEEE 802.3af PoE compliance is provided in the Catalyst 4500 Series with the introduction of this new line card and Cisco IOS Software Release 12.2(18)EW and CatOS Software Release 8.3(1)GLX to meet the needs of enterprise and commercial customers.

The new line card enhance the Cisco Catalyst 4500 Series portfolio by giving customers the flexibility to support either the IEEE 802.3af standard or the Cisco prestandard PoE implementation on the same line card. This ensures backward compatibility with existing Cisco powered devices. This line cards support up to 15.4 Watts per port on all ports, optional power classifications, and intelligent power-management features. The new cards are compatible with any Catalyst 4500 Series or Catalyst 4000 Series chassis and can be deployed with any Supervisor Engine.

 

Read More
Cisco Serial Port Adapter

Cisco Serial Port Adapter

Cisco’s PA-T3+ Packet-over-DS3 port adapter for the Cisco 7200, Cisco 7500, and Cisco 7400 Series routers offer high-density, highly manageable DS3 line termination. Demand for high- capacity corporate backbones, high- speed access to the global Internet, and trunking connections for service provider internetworking has led to growth in clear-channel DS3 con- nections that has outpaced all other types and speeds of leased lines. This growth has placed tremendous strains on the abilities of service providers and network managers to provision and manage new DS3 connections.

 

Read More
Cisco GigaStack GBIC

Cisco GigaStack GBIC

The Cisco Systems GigaStack Gigabit Interface Converter (GBIC) is a versatile, low-cost, Gigabit Ethernet stacking GBIC that offers high-speed interconnectivity between Catalyst 3550, 2950G, 3500 XL and modular Catalyst 2900 XL Switches.

The GigaStack GBIC is implemented in a standard GBIC form, which offers customers the highest level of deployment flexibility and scalability-using available Gigabit Ethernet GBIC ports for high-performance stacking today while preserving the option to migrate to standard Gigabit Ethernet uplinks tomorrow.

 

Read More
libero. ut ut ut pulvinar eget Lorem facilisis